GXservo 25kg QY3225MG High Torque Digital Servo Steering Gear Robotic Steering Gear for DIY Robotic RC Car

Specifications Brand GXservoControl system PWM control systemTemperature range 20℃ 60℃Voltage range 6 0V 7 4VTest voltage AT 6 0V AT 7 4VTorque 22KG CM 25KG CMSpeed 0 2s 60° 0 18s 60°No load current 300MA 450MALoad current 180OMA 2400MADead zone width 2 microsecondsCycle 15000 TIMESWorking angle 90°±5°Direction Counterclockwise Pulse 1500 TO 2500 USECDrive mode field effect transistor driveMotor type Iron core motor 1723Potentiometer indirect transmissionAmplifier Type DigitalSize 40 20 39MMWeight 60G excluding accessories Ball Bearing Double Ball BearingGear material imported copper steel materialPacking included 1x Digital Servo1x Arm1x set of AccessoriesNote 1 Under the static working current servo is energized but there is no movement 2 In the case of no load current operation servos move under no load conditions 3 The current of servo when outputting the maximum torque under the condition of locked rotor current 4 The baud rate can be modified to 500K 250K 128000 115200 76800 57600 38400 5 The maximum number of available bus nodes depends on the power supply capacity and the allowable current specifications of the cable 6 The stall torque is the maximum stall torque of the steering gear The actual working torque is selected from 1 3 1 5 of this value as suitable for the operating point