Assembled BMCU 370C AMS lite Auto Refill Farm Hall Sensor Bidirectional Buffering for A1 A1 MINI 3D Printer AMS MMU

Features 1 BMCU is an open source project It can realize the function of ams lite at low cost This kit is currently compatible with A1 A1mini printers and also with the P1 series experimental This kit can only work in 4 channel mode which means it cannot currently support more than 4 channels via expansion 2 Compatibility A1 A1 mini P1S P1P Experimental X1 Series possible but unproven 3 BMCU370C Hall buffer version it supports bidirectional buffering its feeding is softer and less likely to cause damage to the filamenthub Supports the function of long retraction when cut in filament 4 Open Source Website https github com xwzkj bmcu wiki5 This product has been assembled You can use it directly upon receipt For each set of BMCU 370C we will carefully inspect it after production and connect it to the printer for testing So please feel free to purchase Notes on Connecting to a BMCU 1 Both ends of the 4P cable have anti reverse design Ensure the connectors are correctly connected to prevent damage to the motherboard due to reverse insertion 2 Hot plugging is strictly prohibited Always turn off the power when connecting or disconnecting the printer 3 BMCU currently only work well with firmware version 1 05 00 and older version 4 The firmware versions 06 and 07 cannot be used Please roll back the firmware to version 05 or earlier Please pay attention to the updates on firmware compatibility on the open source website in the future Warning Before